Introducing the Baby Weaver Shuffle SP Car Seat. Suitable from birth to four years, or birth to 18kg. Now with this seat, it does go very phase from birth to 9kg, and there from 9kg to 18kg, the seat does then go forward phasing. Now on the seat, it does come with soft, removable, and washable covers at 30°, from the base to seat, the back, the two sides, and the head rest as well. And now as you can see, the seat does come with a birth insert. Now this can be taken out at any stage to give the child more room in the car seat. This is good, because as the child grows, the seat will then grow with them. Also, it does come with a five point integral harness. Now this harness will keep the child in the car seat nice and securely.
Getting the child into the car seat will loosen the straps off. Now we do have two white buttons on the harness just here. We’re pushing the buttons in, putting from the base of the harness as you can see, the harness has have then be loosened. What we then do, we uncap the buckle. As you can see, that’s how easy it is to get a child into the car seat. Put the harnesses back together, just like so. We then clip it into the buckle. To put the harness nice and tight, pull then top part of the harness, and as you can see, they have then been tightened.
Now what you do now is I shall show you how to fit the seat. First is for you to make sure the seat is in its fully reclined position at all times. After you recline the seat, underneath here, we do have a little black lever. Give that a little squeeze, and the seat has then been fully reclined. We spin the seat around and we fit it rearward facing. Now we do have blue guides to show you where it goes rear facing, and red guides to show you how it goes forward facing. Now we fit the seat using the cars three point seatbelt. You put the seat about out, making sure – to make sure both fast the belt are together. They go through the middle of the seat, making sure they do go through the blue guides. We then clip it into the buckle. Put nice and tight just like so. Now we do have is this blue clip just here. We make sure this does go round both past on the seatbelt. We then clam that down. Once you have done that, you have got another two blue guides where the shoulder section of the belt must go through. So we slide the shoulder section of the belt through that, just like so. Make sure the seat for nice and tight. Now that would be the seat fitted rearward facing.
Now to take it out, take in the seatbelt out from the shoulder part first, releasing the blue clip and clip it from the buckle, and then let the seatbelt go back into its normal place. Now we fit the seat forward facing, still making sure the seat is on its fully reclined position, this way it gives us enough space to get our hand in between the seat. Once again, we make sure bay part the seatbelt do go together. Pass them through the middle of the seat. We then clip it into the buckle. Put it in nice and tight. Put in the shoulder section of the belt through the red clip which would be closes to the buckle. We then clamp it down. Put it in nice and tight. Now this would be the car seat in the car nice and securely.
Now one main thing for you to make sure is any part of this clip here isn’t touching any part of the sitter’s here, because if it is, this will make it very unsafe in the car. Take in the seat out. Release some slack off. Unclip the seat from the buckle. Release in the red clip. We then, put the seatbelt go back into its normal place.
Now one thing I’ve got to mention earlier was buckle cringe rear facing. Now if I spin the seat around, one thing we do need to make sure is any part of this clip here isn’t touching any part of this seat here, because if it is, this will make it very unsafe in the car.
Now this car seat is very lightweight and can be transferred from car to car nice and easily. Now that is the Baby Weaver Shuffle SP Car Seat.
